Jual Motor Stepper Nema 17 High Torque Double Shaft

Motor Stepper Nema 17 High Torque Double Shaft

Jual Motor Stepper Nema 17 High Torque Double Shaft Murah

Spesifikasi :

• Motor Stepper Nema 17 High Torque Double Shaft.
• 1.8 degree step angle.
• Holding rated current/phase 2A.
• Holding torque 55 N•cm.
• 4 wire lengkap dg kabel sekitar 1 meter.
• Lengkap dg timing pulley GT2 22 Teeth.
• Cocok dg belt GT2-6.
• Dimensi body: 42x42x47 mm.
• Kondisi: Bekas
• Berat: 400gr

Note:

• Harga per pcs.
• Barang second berkualitas. All tested

Aplikasi: printer 3D, printer 3D hybrid cnc, cnc router

Jual Motor Stepper Nema 17 High Torque Double Shaft Murah

Harga : @ Rp 85.000,-

Cara pembelian klik Cara Beli

Jual Motor Stepper Nema 17 Precision Bipolar 4 Wire 3D Printer

Motor Stepper Nema 17 Precision Bipolar 4 Wire 3D Printer

Jual Motor Stepper Nema 17 Precision Bipolar 4 Wire 3D Printer Murah

Spesifikasi :

• Motor Stepper Nema 17 Precision Bipolar
• 2 phase hybrid 4-wires
• 1.8 degree step angle
• Holding rated current/phase 0.8A
• Holding torque 50 N•cm
• Diameter shaft 5 mm
• Wiring:
  A=hijau
  A+=kuning
  B=merah
  B+=biru
• Kondisi: Bekas
• Berat: 350gr

Aplikasi: 3D printer, Drawingbot

Note: Harga per pcs
Barang second berkualitas. All tested

Jual Motor Stepper Nema 17 Precision Bipolar 4 Wire 3D Printer Murah

Harga : @ Rp 82.500,-

Cara pembelian klik Cara Beli

Jual Motor Stepper Nema 17 Black Bipolar 4 Wire 3D Printer

Motor Stepper Nema 17 Black Bipolar 4 Wire 3D Printer

Jual Motor Stepper Nema 17 Black Bipolar 4 Wire 3D Printer Murah

Spesifikasi:

• Vsuplai : DC 12V
• Pulse per rotasi : 200 P/R atau 1.8 deg / pulse
• 2 phase hybrid
• Wire : Bipolar 4 Wire
• Dimensi : 3,9 cm x 4,2 cm x 4,2 cm
• Diameter shaft : 5 mm
• Berat : 250 gr
• Kondisi : second berkualitas. Sudah di tes

Note:
Kami tidak melayani pelepasan pulley bawaan stepper. Silahkan pulleynya dilepas sendiri atau minta bantuan bengkel mekanik untuk melepaskannya.

Aplikasi:

3D printer

Jual Motor Stepper Nema 17 Black Bipolar 4 Wire 3D Printer Murah

Harga : @ Rp 85.000,-

Cara pembelian klik Cara Beli

Jual Driver CNC 3 Axis Komplit Kabel Data dan Software

Driver CNC 3 Axis Komplit Kabel Data dan Software

Jual Driver CNC 3 Axis Komplit Kabel Data dan Software Canggih Murah

Spesifikasi :

• Toshiba TB6560AHQ chip – High power
• Absolute maximum ratings: 3,5 A/phase motor output, rated voltage: DC12-DC36V
• Driver output compatible with 2 or 4 phase, 4, 6 or 8 lead stepper motors, 3A max. Suitable for unipolar or bipolar stepper motors
• Adjustable drive current settings for each axis – 25%, 50%, 75%, 100% of full current can be set for different stepper motors  by on-board switch
• Resolution 1, 1/2, 1/8, 1/16 micro stepping output
• 4 channel inputs interface – Can be used for XYZ limit and emergency stop
• Relay spindle interface – Outputs Max. 36V 7,5A for spindle motors or coolant pump (only one device can be powered by this output!)
• Professional design, two-stage signal processing, super anti-jamming
• Built-in overheat protection circuit: Thermal shutdown (TSD). Full protection for your computer and peripheral equipment
• Voltage Selection:

          a. 12-16V DC power supply for Nema 17 stepper motors
          b. 16-24V DC power supply for Nema 23 stepper motors
          c.  24-36V DC power supply for Nema 34 stepper motors

Note:

Paket terdiri dari Driver Controller, Konektor, Kabel Data, CD berisi Manual English dan Driver Software Mach3

Jual Driver CNC 3 Axis Komplit Kabel Data dan Software Canggih Murah

Harga : @ Rp 1.200.000,-

Cara pembelian klik Cara Beli