Jual Driver CNC 3 Axis Komplit Kabel Data dan Software

Driver CNC 3 Axis Komplit Kabel Data dan Software

Jual Driver CNC 3 Axis Komplit Kabel Data dan Software Canggih Murah

Spesifikasi :

• Toshiba TB6560AHQ chip – High power
• Absolute maximum ratings: 3,5 A/phase motor output, rated voltage: DC12-DC36V
• Driver output compatible with 2 or 4 phase, 4, 6 or 8 lead stepper motors, 3A max. Suitable for unipolar or bipolar stepper motors
• Adjustable drive current settings for each axis – 25%, 50%, 75%, 100% of full current can be set for different stepper motors  by on-board switch
• Resolution 1, 1/2, 1/8, 1/16 micro stepping output
• 4 channel inputs interface – Can be used for XYZ limit and emergency stop
• Relay spindle interface – Outputs Max. 36V 7,5A for spindle motors or coolant pump (only one device can be powered by this output!)
• Professional design, two-stage signal processing, super anti-jamming
• Built-in overheat protection circuit: Thermal shutdown (TSD). Full protection for your computer and peripheral equipment
• Voltage Selection:

          a. 12-16V DC power supply for Nema 17 stepper motors
          b. 16-24V DC power supply for Nema 23 stepper motors
          c.  24-36V DC power supply for Nema 34 stepper motors

Note:

Paket terdiri dari Driver Controller, Konektor, Kabel Data, CD berisi Manual English dan Driver Software Mach3

Jual Driver CNC 3 Axis Komplit Kabel Data dan Software Canggih Murah

Harga : @ Rp 1.200.000,-

Cara pembelian klik Cara Beli