DEPOINOVASI | SUPPLIER ROBOTIK & SISTEM OTOMASI

KRAN ELEKTRIK,LINE FOLLOWER,MOTOR GEARBOX,SENSOR,ALARM,POWER SUPPLY,MIKROKONTROLLER,PLC

Archive for July, 2019

Jual E3JK-R4M1 Retroreflective Photoelectric Sensor Switch with Kabel

Posted by dealer on July 31, 2019

E3JK-R4M1 Retroreflective Photoelectric Sensor Switch with Kabel

Jual E3JK-R4M1 Retroreflective Photoelectric Sensor Switch with Kabel Murah

Spesifikasi :

  • Tipe: E3JK-R4M1.
  • Dimensi: 5x5x2 cm.
  • Mode sensor: Retroreflective.
  • Jarak deteksi: 4 meter.
  • Sensitivitas: Adjustable.
  • Supply voltage: DC 10-24V.
  • Kontak Relay: 3A 250VAC max.
  • Response frequency: 25Hz.
  • Response time: 30ms max.
  • IP Rating: IP64
  • Panjang Kabel: 1.2m, PVC cable.
  • Material Casing: ABS.
  • Kaca Reflector: TD-08.
  • Temp kerja: -30 to 65 C.
  • Kelengkapan paket:
    1x Sensor Photoelectric Switch.
    1x Kaca Reflector.
    1x Bracket (with screw, nut).
  • Kondisi: Baru
  • Berat: 300gr

Jual E3JK-R4M1 Retroreflective Photoelectric Sensor Switch with Kabel Murah

Harga : @ Rp 200.000,-

Advertisements

Posted in Sensor, Sensor Infrared | Tagged: , , , | Leave a Comment »

Jual MACH3 USB Breakout Board 4 Axis 100 KHz CNC Controller Driver Kabel CD

Posted by dealer on July 27, 2019

MACH3 USB Breakout Board 4 Axis 100 KHz CNC Controller Driver Kabel CD

Jual MACH3 USB Breakout Board 4 Axis 100 KHz CNC Controller Driver Kabel CD Murah

Spesifikasi :

  • Mach3 USB Breakout Board 4 Axis 100 KHz CNC Controller Driver Kabel CD.
  • Digunakan utk mengontrol CNC 4 Axis. dan juga bisa dipakai utk CNC 3 Axis. Kecepatan transfer data tinggi yaitu 100 KHz shg sangat stabil saat mentransfer data gcode ke driver motor stepper. USB sistem plug & play.
  • Deskripsi:
    1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives.
    2. Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor.
    3. Support automatic probe tool.
    4. Support Emergency input.
    5. Support for limit switch.
    6. Support for connecting electronic handwheel.
    7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
    8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
    9. 4 general-purpose inputs, you can connect the limit switch, e-stop switch, probe switch, back to zero and other device.
    10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
    11. 1 status LED, indicate connection status on the board.
    Kelengkapan paket:
    1 x USB CNC Controller Card.
    1 x USB cable.
    1 x CD.
  • Kondisi: Baru
  • Berat: 200gr

Jual MACH3 USB Breakout Board 4 Axis 100 KHz CNC Controller Driver Kabel CD Murah

Harga : @ Rp 500.000,-

Posted in Mikrokontroler | Tagged: , , , | Leave a Comment »

Jual Papan MDF 18mm pxl 40x30cm

Posted by dealer on July 20, 2019

Papan MDF 18mm pxl 40x30cm

Jual Papan MDF 18mm pxl 40x30cm Murah

Spesifikasi :

  • Papan MDF (Medium Density Fibreboard).
  • Tebal: 18mm.
  • Ukuran: pxl 40x30cm.
  • Bagian sudutnya sudah dioval.
  • Kondisi: Baru
  • Berat: 1.600gr

Note: Harga adalah per biji.

Jual Papan MDF 18mm pxl 40x30cm Murah

Harga : @ Rp 60.000,-

Posted in CNC | Tagged: , , | Leave a Comment »

Jual Motorized Electric Ball Valve 1/2 Inchi AC220V with Manual Knob

Posted by dealer on July 19, 2019

Motorized Electric Ball Valve 1/2 Inchi AC220V with Manual Knob

Motorized Electric Ball Valve 1/2 Inchi AC220V with Manual Knob

Jual Motorized Electric Ball Valve 1/2 Inchi AC220V with Manual Knob Murah

Spesifikasi :

  • Motorized Electric Ball Valve 1/2 Inchi.
  • Kran ball valve dg berpenggerak motor yg bisa dibuka tutup secara bertahap, dan bisa diatur persentase bukaannya dg penambahan arduino + driver relay + feedback sensor.
  • Tegangan: AC220V.
  • Daya: 6W.
  • Perkabelan: 3 kabel (Biru=Neutral PLN, Hitam=Buka kran, Coklat=Tutup kran).
  • Diameter: Drat In Out 1/2 inchi.
  • Temp: 0-95 derajat celcius.
  • Torsi: 4 Nm.
  • Bahan: Kuningan, kuat, anti karat.
  • Kran bisa bekerja pd air tanpa tekanan dan air bertekanan.
  • Terdapat limit switch utk membatasi gerak kran membuka penuh dan menutup penuh.
  • Terdapat knob manual utk membuka dan menutup kran secara manual dan ada indikator posisi katupnya.
  • Cara penggunaan manual:
    Tekan knobnya lalu putar searah jarum jam utk menutup kran atau kebalikan arah jarum jam utk membuka kran.
    Cara penggunaan electric:
    *Membuka kran=hubungkan kabel warna biru dan hitam ke listrik AC220V.
    *Menutup kran=hubungkan kabel warna biru dan coklat ke listrik AC220V.
  • Cara menghubungkan kabel ke listrik bisa menggunakan relay, toggle switch, arduino + driver relay + feedback sensor.
  • Kelengkapan:
    1 unit Motorized electric ball valve 1/2 inchi.
  • Kondisi: Baru
  • Berat: 500gr

Note: Relay, toggle switch, arduino + driver relay + feedback sensor dijual terpisah

Jual Motorized Electric Ball Valve 1/2 Inchi AC220V with Manual Knob Murah

Harga : @ Rp 435.000,-

Posted in Komponen Otomasi, Kran Valve Elektrik | Tagged: , , , , , | Leave a Comment »

Jual Mach3 USB 100 KHz CNC Controller komplit 3 Driver TB6600

Posted by dealer on July 10, 2019

Mach3 USB 100 KHz CNC Controller komplit 3 Driver TB6600

Jual Mach3 USB 100 KHz CNC Controller komplit 3 Driver TB6600 Murah

Spesifikasi :

  • Mach3 USB 100 KHz CNC Controller Breakout Board.
    1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives.
    2. Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor.
    3. Support automatic probe tool.
    4. Support Emergency input.
    5. Support for limit switch.
    6. Support for connecting electronic handwheel.
    7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
    8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
    9. 4 general-purpose inputs, you can connect the limit switch, e-stop switch, probe switch, back to zero and other device.
    10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
    11. 1 status LED, indicate connection status on the board. 
  • TB6600 Single Axis 4A Stepper Motor Driver.
    This unit is an upgraded version of TB6600, the breakdown of increase to 32 segments, for high targeting purposes. Applicable stepper motor: 42.57, 86 Phase type phase (4 wire 6 wire 8 wire line).
    1. 9V-42V DC power supply.
    2. H-bridge Bipolar constant-phase flow-driven.
    3. The maximum output current of 4.0A eight optional.
    4. Up to 32 segments of six types of sub-modes available.
    5. The input signal is high-speed optical insulation.
    6. Standard common anode single pulse interface.
    7. HOLD function offline.
    8. Semi-closed chassis can accommodate the most demanding environment.
    9. Provide semi-automatic current locking function.
    10. Built-in thermal protection and overcurrent protection.
    11.Size: 9.6*5.5*2.7cm.

     

  • Package Contents:
    1 x USB CNC Controller Card.
    1 x USB cable.
    1 x CD.
    3 x Driver TB6600.
  • Kondisi: Baru
  • Berat: 1000gr

Jual Mach3 USB 100 KHz CNC Controller komplit 3 Driver TB6600 Murah

Harga : @ Rp 1.400.000,-

Posted in Driver Motor, Driver Stepper, Komponen Elektronika | Tagged: , , , , | Leave a Comment »

Jual CNC Router Granite Marmer area kerja 100×60 cm Tuner 530W

Posted by dealer on July 5, 2019

CNC Router Granite Marmer area kerja 100×60 cm Tuner 530W

Jual CNC Router Granite Marmer area kerja 100×60 cm Tuner 530W Murah

Spesifikasi :

  • CNC Router Granite Marmer area kerja 100×60 cm Tuner 530W.
  • Support material granite, marmer.
  • Tegangan kerja: AC220V.
  • Daya Tuner: 530W.
  • Bahan frame: Aluminium Profil.
  • Double frame sumbu X.
  • Power supply DC12V 20A.
  • Unit kontroller dengan fan dan casing.
  • Paket sudah termasuk:
  • CD tutorial perakitan dan penggunaan, software aplikasi, kabel usb.
  • Garansi 6 bulan (non elektronik).
  • Kondisi: Baru (barang PO 14 hari kerja)
  • Berat: 30.000gr

Note: barang dikirim kondisi semi rakit. Warna body tuner 530W dimungkinkan berbeda menyesuaikan stok yang ada..

Jual CNC Router Granite Marmer area kerja 100×60 cm Tuner 530W Murah

Harga : @ Rp 9.400.000,-

Posted in CNC | Tagged: , , | Leave a Comment »

Jual Sensor Kecepatan Aliran Air Support Arduino

Posted by dealer on July 5, 2019

Sensor Kecepatan Aliran Air Support Arduino

Jual Sensor Kecepatan Aliran Air Support Arduino Murah

Spesifikasi :

  • Working voltage: DC 5V.
  • Menggunakan sensor optic tipe celah.
  • Output: Pulse Digital TTL.
  • Sensor terpasang pada pipa PVC 1/2 dim.
  • Diameter kincirnya 12 cm. Tinggi keseluruhan sensor dari ujung ke ujung sekitar 20 cm.
  • Kondisi: Baru
  • Berat: 1000gr

Aplikasi: Sensor kecepatan aliran air.

Note: Contoh koding arduinonya bisa diminta setelah barang diterima. Contoh koding adalah sebagai referensi saja. Nilai maupun rumus rumus dalam koding silahkan dimodifikasi sendiri sesuai kebutuhan. Dan koding itu murni kami dapat dari internet. Bukan bikinan kami sendiri. Shg utk penjelasan koding silahkan dipelajari sendiri melalui google.

Warna dimungkinkan berbeda, menyesuaikan stok yg ada.

Jual Sensor Kecepatan Aliran Air Support Arduino Murah

Harga : @ Rp 200.000,-

Posted in Sensor | Tagged: , , , | Leave a Comment »